I recently purchased a used PowerEdge R420 rack server with a Compellent SC220 Storage Shelf. I currently have four 3.5" HDDs in the R420 and ten 2.5" HDDs in the SC220. The R420 server previously had TrueNAS installed, so all of the hard drives on both the R420 and the SC220 are formatted with ZFS. I’m now running Ubuntu on the R420 using ZFS.
The server I’m replacing is an old gaming PC running Manjaro and BTRFS. It has one SSD with the operating system and two 4 TB HDDs set up as RAID0. I’ve been using the RAID to store media downloaded via the Servarr stack.
So, my goal is to create a large pool out of all of the HDDs (except the one running the OS) on the R420 and SC220, and then migrate the media data on the two 4 TB RAID0 drives on my old gaming PC over to R420/SC220 pool. I would then move my Servarr stack over to the R420 as well. Ideally, I’d also like to physically move the two 4 TB HDDs over to the R420. Presumably, I would have to reformat the drives to use ZFS rather the BTRFS and then integrate them somehow into the ZFS pool?
Anyway, I’m not sure of the best procedure to accomplish all of this, so I would be grateful to hear from anyone who has any experience or insight. Thanks in advance.
Initiator-target (IT) mode enables creating a JBOD with zfs vdevs on it. You can have the zfs vdevs in raidz configuration (which would give you the same drive redundancy as a hardware raid, with raidz1 performing similar to RAID5)
zfs is commonly used with a JBOD configuration on a raid controller but you can also use any other kind of controller as long as the individual drives can be written to. examples for this would be NVMe drives directly attached to the PCIe bus or normal SATA controllers. This is more a performance optimization than an issue with compatibility.
Okay, I think that’s basically what I’m trying to do, though I don’t know if I already have a JBOD. My drives certainly do show up on my desktop as just a bunch of individuals drives, haha. How do I access the hardware controller to see how it is currently set up?
that is literally what JBOD means so congratulations you already have one. a classical RAID would show up as a single drive.